Painted shoring prop 10KN

Share:

Description:

The adjustable steel prop is designed to transfer vertical compressive loads in temporary slab props and both beam and panel slab formwork. It consists of two tubes: the internal and external one, equipped with an internal thread, as well as an adjusting nut, a locking pin, and two metal plates creating the upper foot and base foot. It was dip-painted.

A light prop with a load bearing capacity depending on the extension length. It can work with the internal tube directed upwards or downwards. It is equipped with an external thread, without a self-cleaning mechanism, allowing smooth adjustment of the prop height.

The prop is protected on the inside and outside against corrosion with a varnish. The average load-bearing capacity, with a maximum extension, is 10kN.

Available sizes:
300: Weight: 8.4kg, Minimum height: 160cm, Maximum height: 300cm
360: Weight: 9.8kg, Minimum height: 200cm, Maximum height: 360cm
400: Weight: 11kg, Minimum height: 220cm, Maximum height: 400cm
500: Weight: 14kg, Minimum height: 300cm, Maximum height: 500cm


Do you have any questions? Feel free to contact our advisor by phone, WhatsApp or email.