BT20 Beam Secured ends
Description:
It is made as a beam of spruce wood, with an I-beam cross-section, 20cm high and 8cm wide shelves. The web width is 27mm. The girder ends are secured with rounded hard plastic ends, which act as shock absorbers. Available sizes: 1.90-4.50m.- Max bending moment (M): 5 kNm
- Max Shear force (Q): 11 kN
- Rigidity 450kNm
- Support reaction (A) 22kN
- Weight (P) 4,5 kg/mb
_
Do you have any questions? Feel free to contact our advisor by phone, WhatsApp or email.
20/01/2025 - 11:55 |
Michał (#104338)
|
1434 views
I offer
Poland
Quantity: 3000 0 saved H20 beams and panels
Tipologia
H20 beams and panels
Contact the advertiser
Related announcements
More ads from this advertiser
Double / swivel coupler compatible with PLETTAC scaffolding
Double coupler 48/48 The connector is used to connect scaffolding pipes at right angles, crosswise fixed to the scaffolding. Weight (kg) 1,20 SWIVEL COUPLER 48/48 Forged connector, to connect scaffolding pipes at different angles. Galv...
|
Michał (#104338)
| Poland | 1241 views
0 saved
Wedge clamp compatible with BAUFRAME, RASTO
The steel formwork clamp is designed to connect system panels in frame wall formwork systems. Thanks to the movable set of leveling jaws, it is also possible to place compensation elements up to 13.5 cm. The design tensile strength of the c...
|
Michał (#104338)
| Poland | 1239 views
0 saved
Tie rod 75cm - 300cm
The DW-15 tie rod allows safe distribution of stresses from the pressure of the fresh concrete mixture onto the formwork panels. It is to be used with any nuts equipped with internal thread of DW-15 type. This tie rod may be applied to tie ...
|
Michał (#104338)
| Poland | 1241 views
0 saved
Painted construction prop 10KN 3,0-5,0m
The adjustable steel prop is designed to transfer vertical compressive loads in temporary slab props and both beam and panel slab formwork. A light prop with a load bearing capacity depending on the extension length. The prop is protected o...
|
Michał (#104338)
| Poland | 1283 views
0 saved
3-PLY Panel edge protection
The 3-ply glued panel is made of coniferous wood. Both sides of the panel are covered with a weather resistant and waterproof paint, as per EN 13353 (SWP/3), and with a non-stick varnish preventing concrete from sticking to the panel. Cover...
|
Michał (#104338)
| Poland | 1260 views
0 saved
Panel Plastic for formwork
SHUTTERING PANEL PLASTIC is made of high quality polypropylene. It's characterized by high rigidity, heat resistant, corrosion resistant and has much higher impact strength. Minimum 30 cycles of repeated use in pouring concrete. No de-formi...
|
Michał (#104338)
| Poland | 1272 views
0 saved
Smartbeam BT20 Beam
Premium class of beam, made in Austria. The BT20 Smartbeam is a cost-effective, lightweight, full-width, wrought-iron formwork beam. It is distinguished by its low weight and chamfered ends with polyurethane protection by dip coated meth...
|
Michał (#104338)
| Poland | 1436 views
0 saved
Aluminium slab formwork compatible with TOPEC
The Baudeck modular slab formwork is a lightweight and universal formwork for a wide variety of use, especially for large-scale constructons. The size of the Baudeck elements makes the system useful for both smaller and more complicated sl...
|
Michał (#104338)
| Poland | 1562 views
0 saved
Galvanised tripod for uprights other formwork
Galvanised tripod for uprights other formwork. The tripod enables stable and secure positioning of the props when installing the slab formwork. Its construction consists of three hinged uprights made of steel tubes. The way they are con...
|
Michał (#104338)
| Poland | 9281 views
0 saved
New BAUPROP SUPPORTS 20kN 3.0-5.5m slab formwork
New BAUPROP SUPPORTS 20kN 3.0-5.5m slab formwork The BAUPROP 20 steel prop with infinitely variable height adjustment and self-cleaning thread is designed for the transfer of vertical compression loads in temporary floor props and in beam ...
|
Michał (#104338)
| Poland | 9100 views
0 saved
Vedi tutti gli annunci di Michał (#104338)
Want to respond to these ads? Save them as favorites? It's free and all it takes is an email: