BAUFRAME Universal Wall Formwork steel or aluminium

Share:

Description:

The BAUFRAME formwork system is a modern technically advanced product of the highest quality, designed from scratch by our engineers.
A frame of every steel panel comprises of a closed outer profile with the height of 121 mm and width of 20 mm, and of an inner profile of 105 mm height and 25 mm width.
The inner profiles are equipped with function holes for connecting additional accessories.
The steel frames are protected against corrosion by hot-dip galvanising.
Every steel frame of the BAUFRAME system has an innovative solution in the form of steel profiles with parabolic openings for tie rods which protect the shuttering skin from damage while assembling and disassembling the formwork.
The shuttering skin of the panels is made of high quality 15 mm thick birch plywood, coated with a 220 g/cm2 phenolic film.
On special request, it is possible to insert plywood coated with plastic (polypropylene) into the frame.
The BAUFRAME system panels may be installed both vertically and horizontally.
Thanks to a wide range of dimensions, the formwork height can be adjusted to any object height.
Thanks to the design of the frame side profile and the wedge clamp, it is possible to connect panels with a shift and a full range adjustment, yet without using additional elements.
This allows the formwork to be adjusted to any unevenness of the surface.
Compatibility with Bauframe-Alu, Bauschal, Rasto, MidiBox, RHiNO