Stand for modular scaffolding, modular scaffolding

Share:

Description:

Steel stands - with heights: 0.55m; 1m; 1.50m; 2.00m; 2.50m; 3.00m. Each one is equipped with rosettes spaced every half meter,
which are used to install longitudinal transoms, transverse transoms and bracing.
- the available different heights allow you to adjust the stand to uneven terrain
- the vertical post is set on the initial element as the basis of the structure
The stands are made of ø 48.3 x 3.2 mm pipe. The steel grade is S235 JR, with a yield strength Re min greater than 320 Mpa, hot-dip galvanized.
The stands have rosettes (spaced every 0.5 m) with 8 fixing sockets. Larger sockets are used to fasten horizontal and vertical braces, while smaller sockets are used to fasten transoms.
Rosettes are welded on automatic welding machines guaranteeing consistent weld quality.
Prior to the production process, each section of pipe is sent to the Bydgoszcz Institute, which examines whether the certificate is consistent with the delivered batch of pipes, in order to avoid "underlaying" false documents.